Polar Cutter Pump Pulley Assembly 014187 and 014188
Long Hub Version V Belt Split Pulley Assembly for some Polar CE and EMC (EMC 1) Paper Cutters. (equivalent to Polar 014188 and 014187, 014183) ... more info
Polar Cutter Shear Bolt 206016, S91
Shear pins for Polar 82 EL, 82 CE, 82 ST, 86 EL, 86 CE, 90 EL, 90 CE, 90 CS, 90 ST, 92 CS, 92 EL, 92 EMC & 92 CE Paper Cutters. (equivalent to ... more info
Polar cutter type 41mm Wrench 233191
41 mm single open end wrench (spanner) for Polar paper cutters. DIN 894, single end, black phosphate coated. Overall length is 13 1/2" long. ... more info
Polar Cutter type 46mm Wrench 230383a
46 mm single open end wrench (spanner) for Polar paper cutters. DIN 894, single end, black phosphate coated. This wrench is normally used on the jam ... more info
Polar EMC 2 Pump Pulley Assembly 231482 and 231481
V Belt Split Pulley Assembly for Polar EMC 2 Paper Cutters. (231482, 231481, and 017289) This precision machined aluminum split pulley is a direct ... more info
Polar False Clamp Pin, 206035, P10
False clamp pin for use on Polar guillotine paper cutters. (Equivalent to Polar part number 206035) 47mm (1.85") long. These are notched for the ... more info
Polar False Clamp Pin, 232338, P11
False clamp pin for Polar paper cutters, 40 mm (1.58") long. (Equivalent to part number Polar 232338) Notched as shown with flats cut on both ... more info
Polar Gear G335 (245010)
Plastic Gear for Polar paper cutters. (equivalent to Polar part numbers 245010 and ZA3.245010) This black plastic gear is also known as ... more info
Polar Gear G338 (224231)
Plastic Gear for Polar paper cutters. (equivalent to Polar 224231, ZA3.224231) This black plastic gear is also known as "Toothed ... more info
Polar Knife Changing Handle 010113
Knife Changing Handle or Knife Holder for Polar 90EL, 90CE, 92CE, 112ST, 115CE, 115EL (late models), 115ST, 150CE, and 155CE Paper Cutters. ... more info
Polar Knife Changing Handle - H65
Knife Changing Handle for most models of the Polar 55, 58, 66, 71, 72, 76, 78, 80, 82, 90 & 92 Paper Cutters (206579 and ZA3.206579). This ... more info
Polar Knife Changing Handle - H66
Knife Changing Handle for most Polar 107, 112, 115, 137, and 155 Paper Cutters. This solid steel handle is 5" long. The 1/2" diameter shank ... more info
Polar Knife Changing Handle - H67 (207315)
Knife Changing Handle for Polar 107, 112, 115, 137 and 155 Paper Cutters. (equivalent to Polar 207315) This solid heavy duty steel handle is ... more info
Polar Knife Changing Handle - H68 (010660)
Knife Changing Handle for Polar 82 EL, Polar 82 ST, and Polar 86 EL Paper Cutters. (equivalent to Polar 010660) These handles or blade supports have ... more info
Polar Leadscrew Gear G330 (245004)
Plastic Leadscrew Gear for Polar paper cutters. (equivalent to Polar 245004, ZA3.245004) This black plastic gear is also known as "Gear No ... more info
Polar Leadscrew Pinion Gear G329 (222205)
Plastic Leadscrew Gear for Polar paper cutters. (equivalent to Polar 222205, ZA3.222205) This black plastic gear is also known as ... more info
Polar Left Side Angle Lever - Polar 207815
Left side (when facing the front of the machine) angle lever, part of the clamp assembly. This is a used part that comes from a Polar ... more info
Polar Locking Lever Arm 205912
This locking lever arm (equivalent to Polar 205912) fits on the locking valve on Polar CE model paper cutters. It is machined from cast aluminum.
Polar Paper Cutter Shear Bolt 221719, 207466, S92
Alloy Steel Shear Pins for Polar 107 EL and ST (after machine serial number 611352), Polar 112 EL, Polar 115 EL, Polar 115 CE, Polar 115 CS, ... more info
Polar Pinion Adjustment Gear Kit 044924, 256696 - G314
Polar Pinion Adjustment Gear Kit (equivalent to Polar 059882, 044924, ZA3.044924 or 256969, ZA3.256696) This kit is Polar original part ... more info
Polar Pump Pulley Assembly 010280 and 010127
Short Hub Version V Belt Split Pulley Assembly for some of the Polar CE Paper Cutters. (equivalent to Polar 010280 and 010127) This precision ... more info
Polar Pump Pulley Shim 230068 and 240788
Shim for V Belt Split Pulley for Polar EMC Paper Cutters. (230068, 240788) This laser cut steel shim is used between the adjustable pulleys on Polar ... more info
Polar Pump Split Pulley Shim 206640, 266641, SP182
Shim for V Belt Split Pulley for Polar CE Paper Cutters. (206640, 266641) This laser cut steel shim is used between the adjustable pulleys on Polar ... more info
Polar Push Button Cut Switch (027293) CS-500
This cut button or cut switch is used on the front of the table on many Polar paper cutters. (replaces Polar 027293, 010053, 010054, 010055, 015105, ... more info
Polar Push Button Cut Switch (064815) CS-572
This cut button or cut switch is used on the front of the table on all sizes of Polar N, Polar N+, Polar N PRO HD, and Polar N AT HD paper ... more info
Polar Shear Bolt 221301, 221302, 206685, S93
Steel Shear Bolts for Polar 145EL, Polar 150EL, Polar 150CE, Polar 155CE, and Polar 155 EMC (up to serial number 221060) Paper Cutters. ... more info
Polar Shear Bolt 230364c, 260465, S101
Steel Shear Pins for Polar 155 EMC (after serial number 5221201), Polar 155 MON, Polar 155 E, Polar 155 ED, Polar 155 XT (equivalent to Polar ... more info
Polar Shear Bolt 260506, ZA3.423024, S102
Steel Shear Pins for Polar 137 EMC II, 137 MON, 137 X, 137 XT, 137 E, and 137 ED Paper Cutters. (equivalent to Polar 231671 & 231671A, ... more info
Polar Split Pulley - Polar 013113
This used cast aluminum split pulley is mounted on the output shaft of the hydraulic pump on many Polar CE paper cutter. It is in very good ... more info
Polar Table Air Jet Nozzle - AJ501
Air Jet Nozzles for Polar paper cutters. These are 30mm (1.18") long, including the height of the protruding ball. These air jets or air nozzles ... more info
Polar Table Air Jet Nozzle 022514 (AJ502)
Air Jet Nozzles for Polar paper cutters. (equivalent to Polar 022513, ZA3.022513, 022514, ZA3.022514, 017833, 010800, and 010807) These air jets or ... more info
Polar Table Air Jet Nozzle ZA3.042808a (AJ504)
Air Jet Nozzle for Polar paper cutters. (equivalent to Polar 042808, ZA3.042808, 042808a, and ZA3.042808a) These air jets or air nozzles are ... more info
Polar Track Change Gear (010591)
Track Change Gear for Polar paper cutters. (equivalent to Polar 010591) This gear was predominantly used on Polar 115 CE, Polar 137 CE, and ... more info
Polar type 19mm Long Handle Wrench 205375a and 208176a
The overall length of this extra long handle wrench (spanner) is 13" (330 mm). It is used to fit down behind the left side guide when changing ... more info
Polar type 32mm Wrench 233183
32 mm single open end wrench (spanner) for Polar paper cutters. DIN 894, single end, black phosphate coated. Overall length is 10 3/4" ... more info
Polar type 36mm Wrench 205377
36 mm Open end wrench (spanner) for Polar paper cutters. DIN 894, single end, black phosphate coated. This wrench is normally used to move the ... more info
Polar type 36mm Wrench, Special Head 231094a
36 mm Open end wrench (spanner) for Polar paper cutters. DIN 894, single end, black phosphate coated. (equivalent to Polar 231094 and 231094a) ... more info
Prism 115 and Prism 137 Shear Bolt 250600745, S176
Steel Shear Pins for Prism 115 and Prism 137 Paper Cutters, including the Prism QZK guillotine paper cutter models. (equivalent to Prism 250600745) ... more info
Prism 78 and Prism 92 Shear Bolt, 250600832, S175
Steel Shear Pins for Prism 78 & Prism 92 Paper Cutters. (equivalent to Prism 250600832) This steel shear pin or shear bolt is an aftermarket ... more info
Prism Cut Stick Retainer Block
Prism Cut Stick Retainer Block. This plastic block is 16 mm wide x 10.5 mm thick x 35 mm long. It mounts on ... more info
Prism Cutter Air Jet Nozzle - AJ650
This plastic air jet or air nozzle is used in air tables on the SWD versions of Prism paper cutters (those made in China) It has a spring loaded ... more info
Prism Knife Bolt - (250400840A) B705
Knife Bolts for Prism Paper Cutters. Equivalent to Prism part number 250400840A. This hex head flange bolt fits in Prism 115 and 116 and other ... more info
Pro Cut 320 Knife Bolt - B701
Knife Bolt for the Pro-Cut paper cutters. This bolt fits the Pro Cut 320, and possibly other Pro-Cut models. Included with each blade bolt is a ... more info
Pro Cut 320 Knife Change Handle - H71
Knife Changing Handle for Pro-Cut 320 paper cutters. This solid steel handle is 5-7/8" long. The 7/8" diameter shank is knurled ... more info
Pull Arm for Polar Paper Cutter 115 CE, 115 EL, 115 EMC, 013820
This complete pull arm assembly (sometimes called a knife draw arm) fits Polar 112 EL, Polar 112 ST, Polar 115 CE, Polar 115 CS, Polar 115 EL, ... more info
Pull Arm for Polar Paper Cutter 92 EMC, 92 EMC MON, 92 ED 027315
This complete pull arm assembly (sometimes called a knife draw arm) fits Polar 92 EMC (after machine serial number 5311001), Polar 92 EMC MON ... more info
Saber 115, Saber 116, ITOH Robocut Shear Pin - S112
Steel Shear Pins for Saber 115, S-115 (D800362), Saber 116, ITOH 115 Robocut Paper Cutters (ITOH OD969005), and ITOH 132 paper cutters. The ... more info
Saber 137 Cutter Shear Bolt - S113
Steel Shear Pins for Saber 137 Paper Cutters. (SP-D810325) This grade 12.9 steel socket head cap screw shear bolt fits Saber 137 paper cutters. ... more info
Saber 95 Shear Pin - S111
Steel Shear Pins for Saber 95 Paper Cutters. (SMP-55-36) The main shank on this grade 12.9 steel socket head cap screw shear bolt is 8mm ... more info
Safety Clip for Polar Cutter pull arm turnbuckle 206626
This safety catch clip is used on the turnbuckle nut or adjusting nut on the Polar pull arm assembly (sometimes called a draw arm). It fits ... more info
0 item(s) - $0.00 | 
Knife Bolts
