m menu image  m home m cart

All Products





Clamp Shim Support Kit (Polar 271507 and 281710)

Add:
Clamp Shim Support Kit (Polar 271507 and 281710)
Our Part Number: BS-2268 Kit
Price: $68.00

These blade shims or "blade clamp support pads" are used in many of the newer models of Polar guillotine paper cutters, such as the Polar ... more info

Clamp Shim Support Kit (Polar 281709)

Add:
Clamp Shim Support Kit (Polar 281709)
Our Part Number: BS-2264 Kit
Price: $62.00

These blade shims or "blade clamp support pads" are used in many of the newer models of Polar 78 and Polar 92 guillotine paper cutters, ... more info

Clamp Top Position Limit Switch Target (Polar 206033) - M551

Add:
Clamp Top Position Limit Switch Target (Polar 206033) - M551
Our Part Number: M551
Price: $26.00

Paper clamp top position limit switch target or trigger.  This plastic trigger mounts on the left rear side of the clamp on some Polar CE paper ... more info

Claw Clutch Gear - G324 (Polar 206292)

Add:
Claw Clutch Gear - G324 (Polar 206292)
Our Part Number: G324
Price: $68.00

Polar Claw Clutch Gear.  Equivalent to the original Polar part number 206292.  This 6 tooth or 6 lugged "gear" engages ... more info

Clutch Handle Helper Bar (HB16)

Add:
Clutch Handle Helper Bar (HB16)
Our Part Number: HB16
Price: $35.00

These steel bars are used to turn the clutch handles when they are screwed into the flywheel on Polar paper cutters. The holes for the clutch handles ... more info

Clutch Handle Helper Bar (HB24)

Add:
Clutch Handle Helper Bar (HB24)
Our Part Number: HB24
Price: $40.00

These steel bars are used to turn the clutch handles when they are screwed into the flywheel on Polar paper cutters. (equivalent to Polar ... more info

Clutch Slip Rings for brush - Polar 013113

Add:
Max: 1
Clutch Slip Rings for brush - Polar 013113
Our Part Number: U2031
Price: $230.00

This used slip ring assembly is used in the magnetic clutch on Polar 71 and Polar 72 paper cutters, after serial number ... more info

Coil for Polar Backgauge Brake - 013221

Add:
Max: 1
Coil for Polar Backgauge Brake - 013221
Our Part Number: U2033
Price: $210.00

This used coil fits Polar 71 and Polar 72 models.  It is in good condition and was removed from a working Polar 72 CE paper cutter.  ... more info

COMO Shear Bolt - S110

Add:
COMO Shear Bolt - S110
Our Part Number: S110
Price: $35.00

Steel Shear Bolt for Como Paper Cutters. This shear pin measures 80mm (3.15") long below the head and it has a 10mm thread. The head is 22mm in ... more info

Connecting Arm for Clamp - Polar 207800

Add:
Connecting Arm for Clamp - Polar 207800
Our Part Number: U2026
Price: $225.00

Used Polar Connecting Arm or connecting rod.  These arms connect from the angle levers to the sides of the paper clamp.  Comes complete ... more info

Control Cam Wedge for Polar - (270789)

Add:
Control Cam Wedge for Polar - (270789)
Our Part Number: SWB270
Price: $36.00

Control Cam Wedge for Polar Paper Cutters (equivalent to Polar 270789 or ZA3.270789). This plastic wedge, sometimes called the Foot Press Block ... more info

Dexter Lawson Backgauge Support LC-2249 (PS10)

Add:
Dexter Lawson Backgauge Support LC-2249 (PS10)
Our Part Number: PS10
Price: $9.30

This plastic support, or dog point set screw, is used to keep the backgauge from rubbing on the table in some models of Dexter Lawson paper ... more info

Eurocutter Knife Bolt - B706

Add:
Eurocutter Knife Bolt - B706
Our Part Number: B706
Price: $6.80

Knife bolt for larger Eurocutter Paper Cutters. This special low head bolt is 30mm (1.18") long below the head and it has an M12 thread. This ... more info

Finale 115 Shear Bolt - S141

Add:
Finale 115 Shear Bolt - S141
Our Part Number: S141
Price: $44.00

Steel Shear Bolts for Finale paper cutters.  These shear bolts or safety bolts fit the Finale 115 HS and the Finale 115 HD models of these Chinese ... more info

Fine Adjustment Leadscrew Gear G331 (245078)

Add:
Fine Adjustment Leadscrew Gear G331 (245078)
Our Part Number: G331
Price: $48.50

Hand fine Adjustment Backgauge Leadscrew Gear for Polar paper cutters. (245078, ZA3.245078) This cast aluminum metal handfine gear is also ... more info

Gearbox Drive arm or yoke Polar 207845 (013845)

Add:
Max: 1
Gearbox Drive arm or yoke Polar 207845 (013845)
Our Part Number: U2034
Price: $430.00

This used cast iron arm or yoke fits between the gear box output shaft and the bottom of the pull arm assembly on Polar 71, Polar 72 and Polar ... more info

Gearbox Shaft Bolt 224899

Add:
Gearbox Shaft Bolt 224899
Our Part Number: M546
Price: $16.50

This M12 metric bolt fits on the end of the gearbox output shaft on many models of Polar paper cutters.  It comes complete with the grease ... more info

Glass Backgauge Scale for Polar 72 - 217472

Add:
Glass Backgauge Scale for Polar 72 - 217472
Our Part Number: U3033
Price: $325.00

This is a used glass scale from a Polar 72 guillotine paper cutter.  It is in good condition.  There is a very small nick in the ... more info

Guide Shaft for Polar 115 EMC II, 137 XT Paper Cutters

Add:
Guide Shaft for Polar 115 EMC II, 137 XT Paper Cutters
Our Part Number: GS-353
Price: $84.00

Guide shaft or guide rod for the pull arm on Polar 115 EMC MON, Polar 115 EMC II, Polar 115 S, Polar 115 E, Polar 115 ED, Polar 115 X, Polar 115 XT, ... more info

Guide Shaft for Pull Arm in Polar 115 CE Paper Cutter

Add:
Guide Shaft for Pull Arm in Polar 115 CE Paper Cutter
Our Part Number: GS-351
Price: $90.00

Guide shaft or guide rod for the center of the pull arm on Polar 115 CE, Polar 115 CS, and Polar 115 EL paper cutters. (207463) This 14mm diameter ... more info

Guide Shaft for Pull Arm in Polar 115 CE Paper Cutters

Add:
Guide Shaft for Pull Arm in Polar 115 CE Paper Cutters
Our Part Number: GS-350
Price: $90.00

Guide shaft or guide rod for the center of the pull arm on Polar 115CE paper cutters (218649, 221717). This 14mm diameter alignment rod fits up the ... more info

Guide Shaft for Pull Arm in Polar 115 EL & 115 EMC Paper Cutters

Add:
Guide Shaft for Pull Arm in Polar 115 EL & 115 EMC Paper Cutters
Our Part Number: GS-352
Price: $90.00

Guide shaft or guide rod for the center of the pull arm on Polar 115EL and early Polar 115 EMC (up to 1984) paper cutters. The early Polar 115 EMC ... more info

Guide Shaft for Pull Arm in Polar 72 CE Cutters (220329) GS-344

Add:
Guide Shaft for Pull Arm in Polar 72 CE Cutters (220329) GS-344
Our Part Number: GS-344
Price: $54.00

Guide shaft or guide rod for the center of the pull arm on Polar 72CE paper cutters built AFTER machine serial number 4651338. For 72 CE cutters ... more info

Guide Shaft for Pull Arm in Polar 80 EL Paper Cutter

Add:
Guide Shaft for Pull Arm in Polar 80 EL Paper Cutter
Our Part Number: GS-346
Price: $60.00

Guide shaft or guide rod for the center of the pull arm on Polar 80 EL paper cutters. This 11mm diameter alignment rod fits up through the center of ... more info

Guide Shaft for Pull Arm in Polar 82 EL & 90 CE Paper Cutter

Add:
Guide Shaft for Pull Arm in Polar 82 EL & 90 CE Paper Cutter
Our Part Number: GS-347
Price: $72.00

Guide shaft or guide rod for the center of the pull arm on Polar 82 EL and on early Polar 90 CE (up to serial number 4611715) paper cutters. ... more info

Guide Shaft for Pull Arm in Polar 92 EMC II Paper Cutter

Add:
Guide Shaft for Pull Arm in Polar 92 EMC II Paper Cutter
Our Part Number: GS-355
Price: $82.00

Guide shaft or guide rod for the center of the pull arm on Polar 92EMC II (92EMC 2), Polar 92 S, Polar 92 E, and Polar 92 ED paper cutters. ... more info

Guide Shaft for Pull Arm in Polar Power Max 28" Cutters (219561)

Add:
Guide Shaft for Pull Arm in Polar Power Max 28" Cutters (219561)
Our Part Number: GS-345
Price: $54.00

Guide shaft or guide rod for the center of the pull arm on Polar Power Max 28 (PM28), and Polar 72 CE paper cutters built BEFORE machine serial ... more info

Guide Shaft for Pull Arm Polar 90 EL, 92 CE & 92 EMC Cutters

Add:
Guide Shaft for Pull Arm Polar 90 EL, 92 CE & 92 EMC Cutters
Our Part Number: GS-348
Price: $82.00

Guide shaft or guide rod for the center of the pull arm on Polar 82 EL, 90 EL, Polar 90 CE, Polar 92 CE and Polar 92 EMC paper cutters. (221167, ... more info

Guide Shaft, Polar 150 CE, 155 CE, 155 EL, 155 EMC1 Cutters

Add:
Guide Shaft, Polar 150 CE, 155 CE, 155 EL, 155 EMC1 Cutters
Our Part Number: GS-354
Price: $90.00

Guide shaft or guide rod for the center of the pull arm on Polar 150CE, 155EL, Polar 155CE and Polar 155 EMC1 paper cutters. (equivalent to Polar ... more info

Hand Fine Pinion Gear - G320 (218628)

Add:
Hand Fine Pinion Gear - G320 (218628)
Our Part Number: G320
Price: $86.00

Hand Fine Pinion Gear (equivalent to Polar 218628). This 6 tooth gear is used in the hand fine adjustment mechanism on some of the ... more info

Hand Fine Pinion Gear - G325 (206286)

Add:
Hand Fine Pinion Gear - G325 (206286)
Our Part Number: G325
Price: $142.00

Polar Hand Fine Pinion Gear (equivalent to Polar 206286). This 15 tooth helical gear is used in the hand fine adjustment mechanism on most Polar ... more info

Hand Fine Spur Gear - G319 (218631)

Add:
Hand Fine Spur Gear - G319 (218631)
Our Part Number: G319
Price: $105.00

Hand Fine Spur Gear (equivalent to original Polar 218631). This 12 tooth gear is used in the backgauge hand fine adjustment mechanism ... more info

Hand Fine Spur Gear - G321 (218629)

Add:
Hand Fine Spur Gear - G321 (218629)
Our Part Number: G321
Price: $134.00

Hand Fine Spur Gear (equivalent to Polar 218629). This 22 tooth gear is used in the hand fine adjustment mechanism on some of the ... more info

Hand Fine Spur Gear - G326 (Polar 206273)

Add:
Hand Fine Spur Gear - G326 (Polar 206273)
Our Part Number: G326
Price: $112.00

Hand Fine Spur Gear (206273). This 55 tooth helical spur gear is used in the hand fine adjustment mechanism on most Polar EL and Polar CE paper ... more info

Harris Seybold Shear Pin - S108

Add:
Harris Seybold Shear Pin - S108
Our Part Number: S108
Price: $280.00

Shear Pins for Seybold (Harris-Seybold) Paper Cutters. (CKC2160, XCKC2160, or XCKC-2160) This 2" diameter by 4-13/16" long steel shear pin ... more info

Imperial and Horizon Knife Bolt - B57-11

Add:
Imperial and Horizon Knife Bolt - B57-11
Our Part Number: B57-11
Price: $8.21

Knife Bolts for Imperial & Horizon Paper Cutters.  This steel hex head blade bolt is 11mm ( .43") long below the head. It has an M10 ... more info

Imperial and Horizon Knife Bolt - B57-9.5

Add:
Imperial and Horizon Knife Bolt - B57-9.5
Our Part Number: B57-9.5
Price: $8.21

Knife Bolt for Imperial and Horizon Paper Cutters.  This steel hex head bolt is 9.5mm ( .38") long below the head. It has an M10 thread ... more info

ITOH Knife Bolts - B65

Add:
ITOH Knife Bolts - B65
Our Part Number: B65
Price: $13.20

Knife Bolts for ITOH Paper Cutters - B65 Socket Head Bolt, 1/2-12 thread, 1-1/16" overall length below the washer.  The captive washer is ... more info

ITOH Robocut and Saber 115 & 116 Shear Pin - S112

Add:
ITOH Robocut and Saber 115 & 116 Shear Pin - S112
Our Part Number: S112
Price: $16.50

Steel Shear Pins for Saber 115, S-115 (D800362), Saber 116, ITOH 115 Robocut Paper Cutters (ITOH OD969005), and ITOH 132 paper cutters. The ... more info

Jam Nut, Left Hand, M24 x 1.5mm thread - 200607

Add:
Jam Nut, Left Hand, M24 x 1.5mm thread - 200607
Our Part Number: PA1553
Price: $22.00

This 24 mm left hand steel jam nut is used on the Pull Arm Assembly (or Draw Arm) on many of the larger and newer Polar paper ... more info

Jam Nut, Left Hand, M30 x 1.5mm thread - 200609

Add:
Jam Nut, Left Hand, M30 x 1.5mm thread - 200609
Our Part Number: PA1012
Price: $24.00

This 30 mm left hand jam is used on the Pull Arm Assembly (or Draw Arm) on many of the larger Polar paper cutters.  It fits ... more info

Jam Nut, Right Hand, M24 x 1.5mm thread - 200606

Add:
Jam Nut, Right Hand, M24 x 1.5mm thread - 200606
Our Part Number: PA1552
Price: $3.90

This 24 mm right hand steel jam nut is used on the Pull Arm Assembly (or Draw Arm) on most of the newer and larger Polar ... more info

Jam Nut, Right Hand, M30 x 1.5mm thread - 200608

Add:
Jam Nut, Right Hand, M30 x 1.5mm thread - 200608
Our Part Number: PA1011
Price: $7.25

This 30 mm right hand jam is used on the Pull Arm Assembly (or Draw Arm) on many of the larger Polar paper cutters.  It fits ... more info

Knob for Backgauge Handfine Adjustment - K25

Add:
Knob for Backgauge Handfine Adjustment - K25
Our Part Number: K25
Price: $94.00

Knob or handwheel for hand fine backgauge adjustment on many models of Polar Paper Cutters.  (Equivalent to Polar Handwheel part number ... more info

Latch Pin Assembly for False Clamp (P325)

Add:
Latch Pin Assembly for False Clamp (P325)
Our Part Number: P325 Assembly
Price: $63.00

This latch pin assembly locks into the false clamp pin on Polar 72 CE paper cutters. The overall length of the latch pin (including the threaded ... more info

Latch Pin Assembly for False Clamp (P326)

Add:
Latch Pin Assembly for False Clamp (P326)
Our Part Number: P326 Assembly
Price: $63.00

This latch pin assembly locks into the false clamp pin on many different sizes of Polar paper cutters, including the Polar 90 CE, Polar 90 CS, Polar ... more info

Latch Pin Assembly for False Clamp (P327)

Add:
Latch Pin Assembly for False Clamp (P327)
Our Part Number: P327 Assembly
Price: $63.00

This latch pin assembly locks into the false clamp pin on the larger sizes of Polar paper cutters. The overall length of the latch pin (including the ... more info

Latch Pin Assembly for False Clamp, Polar 232333 (P351)

Add:
Latch Pin Assembly for False Clamp, Polar 232333 (P351)
Our Part Number: P351
Price: $58.00

This latch pin assembly locks into the false clamp pin on many different sizes of later models of Polar paper cutters.  Basically it fits on all ... more info

Latch Pin Assembly for False Clamp, Polar 232336 (P350)

Add:
Latch Pin Assembly for False Clamp, Polar 232336 (P350)
Our Part Number: P350
Price: $54.00

This latch pin assembly locks into the false clamp pin on some of the smaller sizes of later models of Polar paper cutters.  Basically it ... more info

Lawson Knife Bolt - B44

Add:
Lawson Knife Bolt - B44
Our Part Number: B44
Price: $8.30

Knife bolts for Lawson guillotine paper cutters. This grade 10.9 steel socket head cap screw fits most Lawson paper cutters.  It is .70" ... more info